Nickel 211， Plate，,E FORU

British Specs:，American Specs:，German Specs:

**Product Datasheet: Nickel 211 Plate (UNS N02211)** **Nickel 211 Plate** is a commercially pure wrought nickel product offering exceptional corrosion resistance, excellent fabrication characteristics, and reliable mechanical properties. With its high nickel content and controlled chemistry, this plate material serves as an ideal choice for demanding applications in chemical processing, food production, and other industries where corrosion resistance and purity are paramount. --- ### **1. Chemical Composition (Typical % by Weight)** The high-purity composition ensures superior performance in corrosive environments: | Element | Content (%) | | :--- | :--- | | **Nickel (Ni)** | **99.0 min** | | **Copper (Cu)** | **0.25 max** | | **Iron (Fe)** | **0.40 max** | | **Manganese (Mn)** | **0.35 max** | | **Carbon (C)** | **0.15 max** | | **Silicon (Si)** | **0.35 max** | | **Sulfur (S)** | **0.025 max** | --- ### **2. Physical & Mechanical Properties** **Physical Properties:** - **Density:** 8.89 g/cm³ (0.321 lb/in³) - **Melting Point:** 1440°C (2625°F) - **Thermal Conductivity:** 70 W/m·K (at 20°C) - **Electrical Resistivity:** 0.096 μΩ·m (at 20°C) - **Coefficient of Thermal Expansion:** 13.3 × 10⁻⁶/K (20-100°C) - **Magnetic Permeability:** <1.02 (essentially non-magnetic) **Mechanical Properties (Annealed Condition):** - **Tensile Strength:** 380 - 480 MPa (55 - 70 ksi) - **Yield Strength (0.2% Offset):** 105 - 205 MPa (15 - 30 ksi) - **Elongation (% in 2 inches):** 40% min - **Hardness (Rockwell B):** 65 - 85 HRB - **Modulus of Elasticity:** 200 GPa (29 × 10⁶ psi) --- ### **3. Product Applications** **Chemical Processing Industry:** - Reactor vessels and chambers - Pressure vessel fabrication - Tank linings and cladding - Electrolytic cell components - Distillation column internals **Food and Pharmaceutical:** - Processing equipment surfaces - Mixing vessel fabrication - Sanitary table tops and work surfaces - Pharmaceutical manufacturing equipment **Electronics and Electrical:** - Battery manufacturing fixtures - Electroplating anodes and fixtures - Semiconductor processing equipment - Electrical bus bars and conductors **Industrial Equipment:** - Heat exchanger baffles - Pump and valve bodies - Corrosion-resistant structural components - Laboratory bench tops and fume hoods **Other Applications:** - Marine components - Caustic handling equipment - Aerospace ground support equipment - Cryogenic containers --- ### **4. International Standards & Specifications** Nickel 211 Plate conforms to major international standards: | Standard | Specification Title | UNS Number | | :--- | :--- | :--- | | **ASTM B162** | Standard Specification for Nickel Plate, Sheet, and Strip | **N02211** | | **ASME SB162** | Nickel Plate, Sheet, and Strip | **N02211** | | **DIN 17740** | Wrought Nickel Materials | **2.4060** | | **ISO 9723** | Wrought Nickel Products | **NW 2201** | | **EN 10095** | Heat Resisting Steels and Nickel Alloys | **Ni 99.2** | **Available Forms and Sizes:** - **Thickness Range:** 3mm to 100mm - **Width Range:** 1000mm to 2000mm - **Length Range:** 2000mm to 6000mm - **Surface Finish:** Hot-rolled, cold-rolled, annealed, pickled --- ### **5. Key Advantages** **Corrosion Resistance:** - Excellent resistance to caustic alkalis - Good performance in organic acids - Superior resistance to neutral and alkaline salts - Outstanding performance in reducing atmospheres **Fabrication Characteristics:** - **Excellent Weldability:** All standard welding methods - **Good Formability:** Can be cold formed and shaped - **Superior Machinability:** Better than most nickel alloys - **Easy to Cut:** Plasma, waterjet, and laser cutting compatible **Physical Properties:** - High thermal and electrical conductivity - Non-magnetic characteristics - Good cryogenic temperature performance - Maintains strength at elevated temperatures --- ### **6. Technical Specifications** **Quality Assurance:** - Ultrasonic testing available - Full material traceability - Mill test certificates per EN 10204 3.1/3.2 - Dimensional compliance to specified tolerances **Fabrication Guidelines:** - **Welding:** Use ERNi-1 or ENi-1 filler metals - **Forming:** Minimum bend radii per thickness guidelines - **Cutting:** All thermal and mechanical methods acceptable - **Stress Relieving:** 425-540°C (800-1000°F) if required **Design Considerations:** - Suitable for temperatures from cryogenic to 540°C - Pressure vessel design per ASME Section VIII - Corrosion allowance typically minimal due to inherent resistance --- **Conclusion:** Nickel 211 Plate provides an outstanding combination of corrosion resistance, fabrication ease, and mechanical reliability for critical industrial applications. Its compliance with international standards and proven performance make it the preferred choice for chemical processors, food and pharmaceutical manufacturers, and other industries requiring durable, corrosion-resistant plate materials. --- **For detailed size availability, technical specifications, and application engineering support, please contact our technical services department.**

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 2799 gallon liquid totes Special package is available on request.