Alloy 700,Inconel 700 Forgings,,E FORU

British Specs:，American Specs:，German Specs:

### **Product Introduction: Alloy 700 / INCONEL® 700 Forgings** #### **Overview** INCONEL® 700 (Alloy 700) forgings represent the pinnacle of high-temperature component manufacturing, offering superior mechanical properties and structural integrity for the most demanding applications. Through controlled deformation and thermal processing, these forgings achieve optimized grain structure, enhanced density, and improved mechanical properties that surpass cast or fabricated alternatives. Ideal for aerospace, power generation, and industrial applications requiring exceptional performance at temperatures up to 980°C (1800°F). --- ### **Key Features & Advantages** - **Superior grain structure** with directional strength properties - **Enhanced mechanical properties** through controlled deformation - **Exceptional high-temperature strength** and creep resistance - **Superior oxidation resistance** up to 980°C (1800°F) - **Improved fatigue resistance** and structural integrity - **Reduced defect probability** compared to cast components - **Excellent reproducibility** and quality consistency --- ### **Chemical Composition (Typical % Weight)** | Element | Content (%) | Role in Alloy | |---------|-------------|---------------| | **Nickel (Ni)** | Balance | Matrix element providing high-temperature strength | | **Chromium (Cr)** | 14.0-17.0 | Oxidation and corrosion resistance | | **Molybdenum (Mo)** | 3.25-4.25 | Solid solution strengthening | | **Titanium (Ti)** | 2.25-2.75 | Precipitation hardening element | | **Aluminum (Al)** | 2.25-2.75 | Precipitation hardening element | | **Iron (Fe)** | 1.0 max | - | | **Cobalt (Co)** | 1.0 max | - | | **Carbon (C)** | 0.12 max | - | | **Boron (B)** | 0.006-0.015 | Grain boundary strengthening | | **Manganese (Mn)** | 0.50 max | - | | **Silicon (Si)** | 0.50 max | - | --- ### **Physical Properties** | Property | Value | |---------|-------| | **Density** | 7.81 g/cm³ (0.282 lb/in³) | | **Melting Point** | 1330-1360°C (2425-2480°F) | | **Thermal Conductivity** | 14.2 W/m·K at 20°C | | **Thermal Expansion** | 13.7 μm/m·K at 20-100°C | | **Specific Heat** | 456 J/kg·K at 20°C | | **Modulus of Elasticity** | 214 GPa (31 x 10^6 psi) | | **Magnetic Permeability** | Essentially non-magnetic | --- ### **Mechanical Properties (Forgings - Heat Treated Condition)** #### **Room Temperature Properties** | Property | Value | |---------|-------| | **Tensile Strength** | 1250-1400 MPa (181-203 ksi) | | **Yield Strength (0.2% Offset)** | 860-1050 MPa (125-152 ksi) | | **Elongation** | 15-20% | | **Reduction of Area** | 20-30% | | **Hardness** | HRC 32-40 | | **Impact Strength** | 40-55 J (30-41 ft-lb) | #### **Elevated Temperature Properties** - **Stress Rupture Strength**: 175 MPa (25.4 ksi) at 815°C (1500°F) for 100 hours - **Creep Strength**: Superior resistance in long-term service - **Thermal Fatigue Resistance**: Excellent performance under thermal cycling - **Retains 75% of room temperature strength** at 870°C (1600°F) --- ### **International Standards** | Standard | Specification | Application | |----------|---------------|-------------| | **ASTM** | B564 | Forgings and Forged Stock | | **ASME** | SB564 | Boiler and Pressure Vessel Code | | **AMS** | AMS 5700 | Forged or Rolled Rings | | **UNS** | N07700 | Unified Numbering System | | **EN** | 2.4953 | European Standard | --- ### **Forging Process Capabilities** #### **Forging Methods** - **Open-Die Forging**: For large, simple shapes - **Closed-Die Forging**: For complex, net-shape components - **Ring Rolling**: For circular and annular components - **Isothermal Forging**: For critical aerospace components #### **Size Range & Capacity** - **Weight Range**: 1 kg to 2000 kg (2.2 lb to 4400 lb) - **Maximum Dimensions**: 3000mm length, 1500mm diameter - **Wall Thickness**: 10mm to 500mm (0.4" to 20") - **Complexity**: Ability to produce intricate geometries #### **Quality Levels** - **Commercial Grade**: Standard industrial applications - **Aerospace Grade**: Stringent quality requirements - **Nuclear Grade**: Highest quality standards - **Custom Specifications**: Customer-specific requirements --- ### **Heat Treatment** **Standard Heat Treatment Cycle:** - **Solution Treatment**: 980-1010°C (1800-1850°F), rapid cooling - **Aging Treatment**: 705-760°C (1300-1400°F) for 16-24 hours, air cooling **Special Forging Considerations:** - **Pre-forging Heating**: Uniform temperature distribution - **Forging Temperature Range**: 1050-1150°C (1920-2100°F) - **Post-forging Cooling**: Controlled cooling rates - **Grain Size Control**: Through thermomechanical processing --- ### **Product Applications** #### **Aerospace & Defense** - **Turbine Disks and Hubs**: Jet engine rotating components - **Compressor Components**: High-pressure compressor parts - **Rocket Motor Components**: Nozzle supports, casing segments - **Airframe Components**: High-temperature structural members - **Afterburner Parts**: Combustion chamber components #### **Power Generation** - **Gas Turbine Wheels**: Rotor assemblies and disks - **Steam Turbine Components**: High-temperature sections - **Nuclear Reactor Parts**: Core structural components - **Turbine Blades and Vanes**: High-pressure stages #### **Industrial Applications** - **Chemical Processing**: Reactor vessels, agitator shafts - **Heat Treatment Equipment**: Furnace rolls, fixtures - **Petrochemical**: Reformers, cracker components - **Industrial Gas Turbines**: Rotor and stator components #### **Specialized Applications** - **Marine Propulsion**: Gas turbine components - **Racing Engines**: High-performance turbochargers - **Research Equipment**: High-temperature test fixtures - **Medical Equipment**: Radiation therapy components --- ### **Quality Assurance & Testing** #### **Non-Destructive Testing** - **Ultrasonic Testing**: Internal quality assessment - **Dye Penetrant Inspection**: Surface defect detection - **Magnetic Particle Testing**: Surface and near-surface flaws - **Radiographic Testing**: Internal structure verification #### **Destructive Testing** - **Tensile Testing**: Mechanical property verification - **Impact Testing**: Toughness evaluation - **Hardness Testing**: Uniformity assessment - **Metallographic Analysis**: Grain structure examination #### **Certification & Documentation** - **Material Traceability**: Full heat-to-part tracking - **Process Documentation**: Complete forging records - **Heat Treatment Records**: Time-temperature documentation - **Final Inspection Reports**: Comprehensive quality records --- ### **Design & Engineering Support** #### **Technical Capabilities** - **Finite Element Analysis**: Stress and thermal analysis - **Process Simulation**: Forging process optimization - **Material Selection Guidance**: Application-specific recommendations - **Design for Manufacturing**: Optimized component design #### **Custom Engineering Services** - **Prototype Development**: Rapid component development - **Testing and Validation**: Performance verification - **Failure Analysis**: Root cause investigation - **Life Assessment**: Remaining life evaluation --- ### **Why Choose Our INCONEL 700 Forgings?** - **Advanced Forging Technology**: State-of-the-art equipment and processes - **Quality Excellence**: Stringent quality control throughout manufacturing - **Technical Expertise**: Decades of experience in high-performance alloys - **Global Certification**: Compliance with international standards - **Proven Performance**: Established track record in critical applications - **Customer Partnership**: Collaborative approach to meeting requirements **Contact us today to discuss your INCONEL 700 forging requirements. Our engineering team provides comprehensive support from design through final certification.** --- *Disclaimer: INCONEL® is a registered trademark of Special Metals Corporation. The information provided is for technical reference only. Final material selection should be verified through appropriate testing and engineering analysis for specific applications.*

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 2972 gallon liquid totes Special package is available on request.