Alloy 713C,Inconel 713C Wire,,E FORU

British Specs:，American Specs:，German Specs:

### **Technical Note: Alloy 713C / INCONEL® 713C Wire Products** #### **Important Processing Notice** *Note: INCONEL 713C is primarily a casting alloy with limited workability due to its high aluminum and titanium content (typically 6.0-7.5% combined). Production of wire products is exceptionally challenging and not commercially available for standard applications. The following information represents theoretical capabilities for reference purposes.* --- ### **Alternative Recommended Materials** For wire applications requiring similar high-temperature performance, consider these workable alternatives: - **INCONEL 718** (UNS N07718) - Excellent workability in wire form - **INCONEL 625** - Good general corrosion resistance and fabricability - **INCONEL X-750** - Good spring properties and high-temperature capability - **HAYNES 214** - Superior oxidation resistance --- ### **Theoretical Product Introduction: Alloy 713C Wire** #### **Overview** INCONEL® 713C wire would represent a specialized product for extreme high-temperature applications, though commercial production is limited due to the alloy's inherent casting characteristics and poor hot workability. --- ### **Chemical Composition (Theoretical % Weight)** | Element | Content (%) | Processing Consideration | |---------|-------------|--------------------------| | **Nickel (Ni)** | Balance | - | | **Chromium (Cr)** | 12.0-14.0 | - | | **Molybdenum (Mo)** | 3.8-5.2 | - | | **Niobium (Nb)** | 1.8-2.5 | Limits cold workability | | **Aluminum (Al)** | 5.5-6.5 | Creates processing challenges | | **Titanium (Ti)** | 0.5-1.0 | Combined with Al reduces ductility | | **Zirconium (Zr)** | 0.05-0.15 | - | | **Boron (B)** | 0.005-0.015 | Affects grain boundary properties | | **Carbon (C)** | 0.08-0.20 | Reduces formability | --- ### **Theoretical Physical Properties** | Property | Value | Note | |---------|-------|------| | **Density** | 7.91 g/cm³ | Standard | | **Melting Range** | 1260-1340°C | - | | **Thermal Conductivity** | 13.4 W/m·K at 20°C | - | | **Thermal Expansion** | 14.2 μm/m·K at 20-100°C | - | | **Theoretical Wire Diameter** | >1.0mm | Limited by workability | --- ### **Potential Applications (If Available)** #### **Specialized Uses** - Experimental high-temperature spring wire - Research and development applications - Specialized welding wire for 713C component repair - High-temperature fastening applications #### **Research & Development** - Material behavior studies - Advanced manufacturing research - Prototype development --- ### **International Standards** *No specific standards exist for 713C wire products due to manufacturing constraints* --- ### **Manufacturing Challenges** #### **Primary Limitations** - **Poor Hot Workability**: Limited ductility at working temperatures - **High Strength**: Difficult to draw to small diameters - **Surface Quality**: Challenges in maintaining consistent surface - **Heat Treatment**: Complex aging characteristics in wire form --- ### **Recommended Alternative Specifications** For actual wire requirements, consider these established specifications: **INCONEL 718 Wire:** - **ASTM**: B637 (Rod, Bar, and Wire) - **AMS**: 5662, 5663, 5664 - **Diameter Range**: 0.5mm to 12.0mm - **Applications**: Springs, fasteners, welding wire **INCONEL 625 Wire:** - **ASTM**: B446 - **AMS**: 5837 - **Excellent corrosion resistance and workability** **INCONEL X-750 Wire:** - **ASTM**: B637 - **AMS**: 5698, 5699 - **Good spring properties up to 650°C** --- ### **Technical Consultation Recommended** Given the manufacturing challenges with INCONEL 713C wire, we strongly recommend consulting with our technical team to identify the most suitable alternative material that can meet your specific performance requirements while maintaining practical manufacturability. **Our engineering team can provide:** - Material selection guidance for high-temperature wire applications - Detailed specifications for workable alternatives - Technical data sheets for INCONEL 718, 625, and X-750 wires - Application-specific recommendations --- ### **Why Choose Alternative Alloys?** - **Proven manufacturability** in wire forms - **Established quality standards** and certifications - **Reliable supply chain** availability - **Comprehensive technical data** and performance history - **Established welding and fabrication procedures** **Contact us today to discuss your specific wire requirements and identify the optimal high-temperature alloy for your application.** --- *Disclaimer: INCONEL® is a registered trademark of Special Metals Corporation. The information provided is for technical reference only. Manufacturing feasibility should be verified for specific applications. Actual product availability may be limited or require special processing.*

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 3001 gallon liquid totes Special package is available on request.