Alloy WE132,Inconel we132 Wire,,E FORU

British Specs:，American Specs:AMS 5676 Welding Wire AMS 5677 Welding Electrodes AMS 5682 Rods and Wire MIL-R-5031 Cl 7 MIL-E-6844 Cl7，German Specs:

**Product Introduction: Alloy WE132 / INCONEL® WE132 Wire** **Overview** Alloy WE132 (commercially known as INCONEL® WE132) is a nickel-chromium-cobalt-molybdenum welding wire designed for joining nickel-based superalloys and high-temperature alloys. This wire exhibits excellent resistance to oxidation, corrosion, and thermal fatigue, making it suitable for critical applications in aerospace, power generation, and chemical processing industries. --- **Chemical Composition (Weight %)** | Element | Content (%) | |------------------|-----------------| | Nickel (Ni) | Balance | | Chromium (Cr) | 20.0 - 24.0 | | Cobalt (Co) | 10.0 - 13.0 | | Molybdenum (Mo) | 8.0 - 10.0 | | Titanium (Ti) | ≤ 0.5 | | Aluminum (Al) | ≤ 0.5 | | Iron (Fe) | ≤ 1.5 | | Carbon (C) | ≤ 0.05 | | Manganese (Mn) | ≤ 0.5 | | Silicon (Si) | ≤ 0.5 | --- **Physical Properties** | Property | Value | |-------------------------------|---------------------------| | Density | 8.35 g/cm³ (0.302 lb/in³) | | Melting Range | 1330-1380°C (2426-2516°F) | | Electrical Resistivity | 1.25 μΩ·m | | Thermal Conductivity | 11.2 W/m·K (at 100°C) | | Specific Heat Capacity | 420 J/kg·K (at 20°C) | | Coefficient of Thermal Expansion | 13.8 × 10⁻⁶/°C (20-300°C) | | Modulus of Elasticity | 215 GPa (31.2 × 10⁶ psi) | --- **Mechanical Properties (As-Welded Condition)** | Temperature | Tensile Strength | Yield Strength (0.2%) | Elongation | |--------------------|------------------|----------------------|------------| | Room Temperature | 750-850 MPa | 450-550 MPa | 25-35% | | 815°C (1500°F) | 450-550 MPa | 350-450 MPa | 20-30% | | 980°C (1800°F) | 250-350 MPa | 200-300 MPa | 15-25% | --- **Product Applications** - **Aerospace**: Welding turbine blades, combustors, and afterburner components. - **Power Generation**: Repair and fabrication of gas turbine components, heat exchangers. - **Chemical Processing**: Joining reactors, piping, and valves exposed to corrosive media. - **Nuclear Industry**: Components requiring radiation resistance and high-temperature stability. - **Industrial Furnaces**: Heating elements and radiant tubes. --- **International Standards & Specifications** - **AWS A5.14**: ERNiCrCoMo-1 (Nickel-based welding wire classification). - **AMS 5837**: Welding wire, nickel-based corrosion and heat-resistant alloy. - **ASTM B166**: Nickel-chromium-iron alloy rod, bar, and wire. - **ISO 18274**: Welding consumables for nickel and nickel alloys. - **ASME SFA-5.14**: Specification for nickel and nickel-alloy bare welding electrodes and rods. --- **Wire Specifications & Dimensions** - **Diameter Range**: 0.8 mm to 4.0 mm (0.032" to 0.156"). - **Surface Finish**: Bright (bare) or lightly oxidized. - **Spool Sizes**: 5 kg to 15 kg spools; straight lengths upon request. - **Tolerances**: Diameter ±0.025 mm; ovality ≤0.01 mm. --- **Welding Characteristics** - **Process Compatibility**: GTAW (TIG), GMAW (MIG), PAW (Plasma Arc). - **Shielding Gas**: 100% argon or argon-helium mixtures. - **Preheating**: Generally not required; maintain interpass temperature below 150°C. - **Post-Weld Heat Treatment**: Stress relief at 870-900°C (1600-1650°F) if needed. --- **Quality Assurance** - **Certification**: EN 10204 3.1/3.2, with traceability to melt heat number. - **Testing**: Chemical analysis, mechanical tests, and nondestructive inspections (PT, RT). - **Compliance**: RoHS, REACH, and industry-specific customer requirements. --- **Note** INCONEL® WE132 wire is optimized for welding similar and dissimilar nickel-based superalloys, providing crack-resistant deposits with stable performance under cyclic thermal conditions. Its composition ensures minimal segregation and consistent weld metal properties. **Disclaimer** The information provided is for reference purposes. Actual performance may vary based on welding parameters, base material, and service conditions. Always validate procedures for critical applications per relevant standards and manufacturer guidelines.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 3066 gallon liquid totes Special package is available on request.