Alloy WE132,Inconel we132 Rod,,E FORU

British Specs:，American Specs:MIL-E-6844 ClB，German Specs:

**Product Introduction: Alloy WE132 / INCONEL® WE132 Rod** **Overview** Alloy WE132 Rod (INCONEL® WE132) is a nickel-chromium-cobalt-molybdenum alloy supplied in rod form, specifically engineered for high-temperature applications requiring exceptional oxidation resistance, corrosion resistance, and mechanical strength. This wrought product form maintains the alloy's superior performance characteristics while providing excellent machinability and structural integrity for critical components in extreme environments. --- **Chemical Composition (Weight %)** | Element | Content (%) | |------------------|-----------------| | Nickel (Ni) | Balance | | Chromium (Cr) | 20.0 - 24.0 | | Cobalt (Co) | 10.0 - 13.0 | | Molybdenum (Mo) | 8.0 - 10.0 | | Titanium (Ti) | ≤ 0.5 | | Aluminum (Al) | ≤ 0.5 | | Iron (Fe) | ≤ 1.5 | | Carbon (C) | ≤ 0.05 | | Manganese (Mn) | ≤ 0.5 | | Silicon (Si) | ≤ 0.5 | --- **Physical Properties** | Property | Value | |-------------------------------|---------------------------| | Density | 8.35 g/cm³ (0.302 lb/in³) | | Melting Range | 1330-1380°C (2426-2516°F) | | Electrical Resistivity | 1.25 μΩ·m | | Thermal Conductivity | 11.2 W/m·K (at 100°C) | | Specific Heat Capacity | 420 J/kg·K (at 20°C) | | Coefficient of Thermal Expansion | 13.8 × 10⁻⁶/°C (20-300°C) | | Modulus of Elasticity | 215 GPa (31.2 × 10⁶ psi) | --- **Mechanical Properties (Solution Annealed Condition)** | Temperature | Tensile Strength | Yield Strength (0.2%) | Elongation | |--------------------|------------------|----------------------|------------| | Room Temperature | 800-900 MPa | 500-600 MPa | 30-40% | | 815°C (1500°F) | 500-600 MPa | 400-500 MPa | 25-35% | | 980°C (1800°F) | 300-400 MPa | 250-350 MPa | 20-30% | --- **Product Applications** **Aerospace Components** - Gas turbine engine shafts - Turbine blades and disks - Combustion chamber components - Afterburner parts - High-temperature fasteners **Power Generation Equipment** - Gas turbine components - High-temperature bolts and studs - Valve stems and seats - Heat exchanger parts - Nuclear reactor components **Chemical Processing** - Reactor internals - Heat exchanger tubes - High-temperature valves - Pump shafts and components - Furnace fixtures **Industrial Applications** - Heat treatment fixtures - Industrial furnace rolls - Thermal processing equipment - High-temperature tooling --- **International Standards & Specifications** **ASTM Standards** - ASTM B166: Standard Specification for Nickel-Chromium-Iron Alloys Rod, Bar, and Wire **Aerospace Standards** - AMS 5667: Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings **International Standards** - ISO 9724: Nickel and Nickel Alloys — Bars **European Standards** - EN 10095: Heat Resisting Steels and Nickel Alloys **Quality Standards** - EN 10204 3.1/3.2 Material Certification - ISO 9001 Quality Management Systems --- **Rod Specifications & Dimensions** **Available Forms** - Round rods: 5mm to 150mm diameter - Centerless ground rods - Turned and polished rods - Hexagonal and square bars **Standard Sizes** - Diameter Tolerance: h9 (ground), h11 (turned) - Length: 3000mm to 6000mm standard - Straightness: ≤1mm per meter **Surface Conditions** - Black surface (as-drawn) - Turned surface - Centerless ground - Polished finish (upon request) --- **Fabrication & Processing** **Machining Parameters** - Cutting Speed: 15-25 m/min - Feed Rate: 0.1-0.3 mm/rev - Depth of Cut: 1-3 mm (roughing), 0.1-0.5 mm (finishing) - Tool Material: Carbide tools recommended **Heat Treatment** - Solution Annealing: 1150-1180°C (2102-2156°F) - Rapid Cooling: Water quench or fast air cool - Stress Relief: 870-900°C (1600-1650°F) **Welding Compatibility** - TIG welding recommended - Matching filler metals - Preheating generally not required - Post-weld heat treatment optional --- **Quality Assurance** **Testing Requirements** - Chemical analysis verification - Mechanical properties testing - Ultrasonic testing (as required) - Macroetch examination - Grain size assessment **Certification** - Mill test certificate to EN 10204 3.1/3.2 - Material test reports - Heat treatment certification - Full material traceability --- **Note** INCONEL® WE132 Rod offers excellent high-temperature strength and oxidation resistance, making it suitable for the most demanding applications in aerospace and power generation industries. The rod form provides good machinability for manufacturing precision components while maintaining the alloy's characteristic performance at elevated temperatures. **Disclaimer** The information provided is for reference purposes. Actual properties may vary based on manufacturing process and heat treatment. For critical applications, consult manufacturer's technical data sheets and applicable standards. All materials should be used in compliance with relevant codes and engineering standards.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 3068 gallon liquid totes Special package is available on request.