Self-holding electromagnetic ball valve, electromagnetic ball valve

Features:

This valve adopts a ball valve structure to enhance sealing performance and extend service life.

2. The coil is instantaneously charged, avoiding the traditional solenoid valve from being unable to work due to the coil being burned out easily caused by long-term electrification.

3. There is no requirement for the flow direction of the medium. The two chambers of the solenoid valve are the inlet and outlet of each other.

4. Due to its straight-through structure, there is no requirement for the cleanliness of the medium.

5. There is no requirement for the working pressure at the inlet and outlet. It can operate normally within the pressure range of 0 to 2.5MPa.

6. During operation, both the internal and external circuits need to work together to switch between the closed and closed states of the valve. Therefore, even if the external switch signal malfunctions, as long as the internal circuit is normal, it will not cause the valve to malfunction.

7. This valve is entirely made of stainless materials to ensure smooth operation.

Typical uses:

1. Control the cooling water used in power stations

2. Sealed water for power stations

3. Disconnection of the oil supply pipeline in the power station

Packing of Standard Packing: 

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 470 gallon liquid totes Special package is available on request. E FORUs’  is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.